How To Change Settings On Linksys Wireless Router

This article volition provide the instructions on how to manually fix the wireless network of your Linksys router.

Important:  The instructions in this article are only applicable for unmarried-band routers.  If you have a dual-band router, there will be 2 (2) drop-downwardly lists – 1 for the 5 GHz frequency band and another for 2.4 GHz.  To know how to manually configure the wireless network of a Linksys Dual-Band router, click hither .

To manually gear up the wireless network of your Linksys router, y'all demand to do the following:

Accessing the web-based setup folio of the router
Configuring the wireless settings of the router

Accessing the web-based setup folio of the router

Step 1:
Access the router'southward web-based setup page.  Open up any web browser (Internet Explorer®, Mozilla Firefox®, or Safari®) and enter "192.168.1.1" in the address bar then printing [Enter].

Step 2:
You will be asked for your login details.  Exit the User proper name field blank and enter "admin" in the Password field then click OK.

Configuring the wireless settings of the router

Configuring the wireless settings may depend on the kind of router that you lot are using.  Click on the links to learn how: Wireless-N routers
Wireless-K, Wireless-B, Wireless-A routers

Wireless-N routers

Footstep 1:
On the web-based setup page, click the Wireless tab.

Step 2:
Select Manual for the Configuration View.

Step 3:
Select Mixed on the Network Style drop-downwards list.  This is recommended so that devices with unlike wireless standards can still connect to the network.

Step 4:
Enter your desired Network Name (SSID) in the field provided.

Stride v:
Select Auto (20MHz or 40MHz) from the Aqueduct Width drop-down list.

Stride half-dozen:
Select a Aqueduct from the drop-downwards list.  The recommended channels are 1, half-dozen, and eleven since these are considered non-overlapping.

Step 7:
Select your preferred SSID Broadcast setting.  If you want your wireless network name to be seen publicly, select Enabled.  Otherwise, select Disabled.

Afterward performing the steps above, your wireless network settings should await like the one shown in the epitome below:

Footstep viii:
Click.

Wireless-K, Wireless-B, Wireless-A routers

Step one:
On the web-based setup page, click the Wireless tab.

Step two:
Select Mixed.

Step three:
Enter your preferredWireless Network Proper name (SSID) in the field provided.

Step 4:
Select your desiredWireless Channel from drop-down list.  The recommended channels are one, 6, and eleven since these are considered non-overlapping.

Stride 5:
Select your preferred Wireless SSID Circulate setting.  If you desire your wireless network name to be seen publicly, select Enable.  Otherwise, select Disable.

Afterward performing the steps above, your wireless network settings should expect similar the i shown in the image beneath:

Expanding your network

You can add together other products to your existing network and extend wireless signals to hard-to-reach areas in your home.  With information technology, you can accommodate more devices for gaming and amusement.  Click on the links beneath to know more than about products that extend your Linksys router's potential. How to extend your router'due south range with a range extender
Connecting computers to your local network using the Powerline adapter
Different Linksys Powerline adapters that can exist used for setting up a Powerline network

Related Manufactures: Irresolute your wireless network password
How to check and update the Router Countersign using your Linksys cloud account​
Checking the Linksys Wi-Fi Router'due south name and password

How To Change Settings On Linksys Wireless Router,

Source: https://www.linksys.com/th/support-article?articleNum=140633

Posted by: smithgrewle.blogspot.com

Share this post