How To Set Up Bissell Proheat 2x

USER MANUAL

Bissell
Proheat 2x

PROheat 2X
USER'South GUIDE
8920, 8930, 8960, 9200, 9300, 9400 Series

Thanks for buying a BISSELL PROheat 2X®

We're glad you lot purchased a BISSELL PROheat 2X heated formula deep cleaner. Everything we know about floor care went into the blueprint and structure of this complete, high-tech home cleaning system.

Your BISSELL PROheat 2X is well fabricated, and we dorsum it with a express ane year warranty. Nosotros too stand behind it with a knowledgeable, dedicated Consumer Services department, and so, should you always have a problem, you'll receive fast, considerate assistance.

My great-granddad invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your PROheat 2X.

Thanks again, from all of usa at BISSELL.

Mark J. Bissell
Chairman, President & CEO

Important SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions earlier using your ProHeat 2X®.

WARNING:
To reduce the risk of fire, electric daze, or injury:

• Do non immerse.
• Use simply on surfaces moistened by cleaning procedure.
• E'er connect to a properly grounded outlet.
• Run across Grounding Instructions.
• Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
• Do not leave machine when it is plugged in.
• Practice not service machine when it is plugged in.
• Practise not use with damaged cord or plug.
• If appliance is not working every bit it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
• Employ indoors only.
• Practice non pull or bear by cord, apply cord equally a handle, shut door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
• Unplug by grasping the plug, non the cord.
• Do not handle plug or appliance with moisture easily.
• Practise not put whatever object into appliance openings, use with blocked opening, or restrict air flow.
• Practise not expose hair, loose clothing, fingers or body parts to openings or moving parts.
• Practice non pick up hot or called-for objects.
• Do not pick upwardly flammable or flammable materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
• Practise not employ appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
• Exercise not selection upwardly toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
• Do not modify the 3-prong grounded plug.
• Exercise not allow to be used as a toy.
• Do not use for whatever purpose other than described in this User'southward Guide.
• Practise non unplug by pulling on the cord.
• Employ only manufacturer's recommended attachments.
• Utilise only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid department of this guide.
• Proceed openings free of grit, lint, hair, etc.
• Do not bespeak zipper nozzle at people or animals
• Proceed appliance on a level surface.
• Plow off all controls before unplugging.
• Unplug before attaching the TurboBrush®.
• Be actress careful when cleaning stairs.
• Close attention is necessary when used by or near children.
• Always install float before any wet pick up performance.

Salve THESE INSTRUCTIONS.

This model is for household utilize only.

GROUNDING INSTRUCTIONS

This appliance must be continued to a grounded wiring organisation. If it should malfunction or break down, grounding provides a safe path of to the lowest degree resistance for electric current, reducing the take chances of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only exist plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING:

Improper connection of the equipment grounding conductor can result in a risk
of electrical daze. Check with a qualified electrician or service person if you lot aren't sure if the outlet is properly grounded. DO Not MODIFY THE PLUG . If it will not fit the outlet, have a proper outlet installed past a qualified electrician. This apparatus is designed for use on a nominal 120-volt circuit, and has a grounding zipper plug that looks similar the plug in the drawing to a higher place. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

Product view

Alarm:
To reduce the risk of fire and electrical shock due to internal component impairment, use only BISSELL cleaning fluids intended for use with the deep cleaner.

Cleaning fluid
Proceed plenty of genuine BISSELL 2X formula on hand and so you lot can make clean and protect whenever it fits your schedule. Always use 18-carat BISSELL deep cleaning formulas. Not-BISSELL cleaning solutions may harm the car and will void the warranty.

Assembly

Your PROheat 2X comes in three, piece of cake to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only affair yous will need to get together your cleaner is a Phillips head screwdriver.

1. Slide upper handle onto lower handle.
2. Screw three screws into the marked holes.
3. Place upper hose rack onto back of upper handle, and secure with screw.
4. Place lower hose rack onto dorsum of upper handle past pushing in and sliding down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power string and flex hose.
7. Continue flex hose snugly in place by using the hose secure latch.

PROheat 2X assembly is now complete.

Operations

Special features
Your BISSELL PROheat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to go the deep down dirt for a maximum clean. Not but does information technology with come several unique features, it has been designed with you lot, the customer, in mind.

Congenital-in-heater feature
BISSELL PROheat 2X models all feature a patented congenital-in heater which will heat the hot tap h2o you put in upward to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 190 degrees. The heater switch on the forepart of the motorcar controls the heater so you take the option to turn off the heat if you are cleaning fragile wool or oriental rugs.

Warning:
Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures.

Custom Make clean™
The Custom Clean feature automatically mixes hot tap water with the BISSELL formula. Simply choose one of the 4 settings (heavy traffic, normal clean, light make clean, or water rinse) and the PROheat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.
This characteristic is available on all PROheat 2X models, either behind the two-in-i water tank or on the upper handle. Having a separate solution tank from the water tank also allows no waste of formula. Because the water and solution are stored separately, they are not mixed until you are ready to clean. When your cleaning job is finished, the formula tin can be stored ready to apply in your car for the side by side fourth dimension!

Dual DirtLifter® PowerBrushes
The two DirtLifter PowerBrush rolls are designed to enhance cleaning operation.
The bristle blueprint safely lifts out the deep down dirt while gently preparation carpet fibers. The floating pause self-adjusts to all rug heights and protects your carpet if you lot get out the ability switch ON ( I ). Once the product is in the upright position, the brushes automatically stop spinning. The detent pedal will actuate the brushes when floor cleaning.

Menstruation indicator (select models only)
The flow indicator is located on the rear encompass of your unit. When the unit of measurement runs out of water or solution the flow indicator will instantly let y'all know.

2-in-1 water tank
Our ii-in-ane h2o tank full capacity arrangement is designed with a heavy duty float inside for clean water. Equally you make clean, the make clean h2o in the bladder will empty and mix with the cleaning formula. Dingy water pulled out of your carpets will collect around the exterior of the float and then that clean and dingy water are e'er kept separate. This allows the user to just carry one tank to and from the sink for emptying and filling.

ReadyTools™ dial
This provides either floor cleaning or above flooring cleaning with the plow of a knob. Choose "TOOLS" setting for stairs, upholstery and hard to reach areas and "FLOOR CLEANING" for carpets expanse rugs and bare floors.

Scotchgard™ Protector
Rug protection practical at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, simply BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.

To maintain your Scotchgard 5-yr limited stain warranty, you no longer are required to hire a professional. By using your BISSELL PROheat 2X machine with BISSELL 2X formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains in effect. No other dwelling house deep cleaning organization tin practice this for you. Refer to the Scotchgard protector warranty for details.

Earlier you lot clean

1. Move furniture to some other area if cleaning an entire room (optional).
2. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
3. Plan your cleaning route to go out an exit path. It is best to begin cleaning in the corner farthest from your exit.
4. Pretreating (optional)
   Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpeting in high traffic areas such as entryways and hallways.
   BISSELL Tough Stain PreTreat
   A. Spray the BISSELL Tough Stain Pre-treat formula onto heavy traffic areas, soiled areas, or stains.
   B. Permit to penetrate for at least 3 minutes.
   C. Make clean as normal, using the BISSELL PROheat 2X machine on the loftier traffic setting, following the instructions beneath.

Attention:
Some Berber carpets have a tendency to fuzz with wearable. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this status. Please see Stain Removal instructions on folio 15.

Carpet cleaning

1. Make full the ii-in-1 Water Tank. Remove the tank from the base of the motorcar by lifting up the tank carry handle. Behave like a bucket to the sink.
   1a. Unlatch the top of the tank from the bottom by lifting upward on the tank latch located on the dorsum of the tank.
   1b. Remove the meridian of the tank by lifting upwards on the handle.
   Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.
   1c. Fill the heavy duty bladder with clean hot tap h2o. Practice not boil or microwave water as information technology can destroy the bladder.
   1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top role of the tank to the lesser, carefully claw the lip on the tiptop tank into the groove on the lesser tank.
   1e. Fasten tanks together by securing the latch in the back.
   Note: Remember to secure the tank latch in the back and test to brand sure information technology is secure earlier picking upwardly the tank.

2. Remove formula tank from back of machine.

3. Fill up the formula tank by outset unscrewing the cap and insert. Ever use genuine BISSELL 2X formulas to maximize cleaning and for the safety of your machine. Fill up with water to WATE R line so fill upwards to FO RMULA line with BISSELL 2X Full-bodied formula. Replace formula tank.

4. Prepare Custom Clean Punch. Just choose one of the four settings (heavy traffic, normal make clean, calorie-free make clean, or water rinse).

five. Set ReadyTools Dial to the floor cleaning setting.

Carpet cleaning connected

six. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow i infinitesimal for the built-in heater to warm-upward before cleaning. The PROheat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning.

vii. While pressing the trigger, make one boring frontwards wet pass and another one back. Caution: Practice not overwet. Take intendance not to run over loose objects or edges of surface area rugs. Stalling brush may result in premature belt failure.

Note: Your automobile is equipped with a circuit breaker that will automatically close off the castor if a large or loose object is caught in the brush roll. If that happens, be certain to unplug your machine, remove the foreign object, so plug the machine dorsum in to reset the circuit breaker.

WARNING:
To reduce the gamble of due to internal component harm, utilise only BISSELL cleaning fluids intended for use with the deep cleaner.

Release the trigger and make one irksome forward and backward pass over the same area to remove whatsoever balance dingy h2o and aid in drying. Echo cleaning passes until solution being pulled up appears make clean. Continue passes without pressing the trigger until you lot can't meet any more than water being pulled upwardly.

Go on plenty of genuine BISSELL 2X formula on hand then you tin make clean whenever it fits your schedule. E'er use 18-carat BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

eight. Remove the tank from the base of the auto by lifting upwardly on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the muddied water.
8a. Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the dorsum of the tank.
8b. Remove the peak of the tank by lifting up on the handle.
Note: how the lip on the height tank separates from the groove in the lesser tank. This placement is of import when putting the tank back together.

8c. Elevator the lesser portion of the tank; pour out dirty h2o in the sink through the triangular shaped opening in the corner of the tank.
Annotation: You may notice hair & debris deposits on the rug or in the tank that were loosened by the cleaning action. This debris should be picked up and thrown away.
8d. F sick the heavy duty bladder with make clean hot tap h2o, following instructions 1c through 1e on page 10.
Note: Remember to secure the tank latch in the back and test to make sure information technology is secure before picking upwards the tank. Always check the level of cleaning formula in the formula tank at the aforementioned time, and refill as needed.

nine. Water rinse (recommended). Rinsing is an optional step that can be done during the cleaning process or subsequently the carpeted surface area has been completed. Switch to the water rinse setting, on the Custom Clean dial and follow the aforementioned path as you did for cleaning. Accept care to do a forward (moisture) stroke by depressing the trigger, and a astern (wet) stroke, followed by a frontward and astern (dry) stroke, releasing the trigger. Go along this until the water y'all see coming up the nozzle is clear. (Run across page 17 for more car care tips.)

Keep plenty of genuine
BISSELL 2X formula on hand so you can clean whenever it fits your schedule. E'er apply genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the auto and void the warranty.

Cleaning with attachments
Your PROheat 2X machine comes equipped with a hose and at least one zipper for cleaning stairs, upholstery, and more than.

1. Of import! If using to clean upholstery, bank check upholstery tags.
   A. Bank check manufacturer'south tag before cleaning. "Due west" or "WS" on the tag ways you can use your PROheat 2X. If the tag is coded with an "X" or an "S" (with a diagonal stripe through information technology), or says "Dry Clean Only", do non keep with any deep cleaning machine. Practice not utilize on velvet or silk. If manufacturer'southward tag is missing or not coded, check with your furniture dealer.
   B. Check for colorfastness in an inconspicuous place.
   C. If possible, check upholstery stuffing. Colored stuffing may drain through fabric when wet.
   D. Plan activities to allow upholstery time to dry out.
   E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

2. Follow the instructions on page x for filling the ii-in-i h2o tank and the formula tank.

3. Set ReadyTools dial to the "TOOLS " setting. This volition permit spray and suction from the hose.

four. Set Custom Make clean dial for heavy traffic, normal clean, low-cal clean, or water rinse as desired.

v. Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch and heater (if desired).

seven. Make clean past pressing the trigger to spray solution onto the area to be cleaned. Slowly motility the tool back and along over the soiled surface. Release the trigger to suction soiled water. Continue to make clean in the area, working in small sections, until no more dirt can exist removed. Rinse (optional) and suction every bit needed.
Caution: Practise no overwet.

Alert: To reduce the hazard of injury, be actress careful when cleaning stairs. Make sure automobile is secure and level.

8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy.

nine. It is recommended that you suction clean water from a bowl to rinse out the hose.

10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose.

11. Gyre flex hose around the tool caddy.

12. Empty 2-in-ane water tank and rinse out, following the instructions on page 12.

13. Render ReadyTools dial to floor setting.

Deep reach tool attachment (Select models just)
Exercise Non Filibuster! Attention to an accident soon afterward it occurs ensures the most optimal make clean. Leaving information technology for an extended period of fourth dimension may cause it to set and get permanent.

1. Follow the instructions on page 10 for filling the two-in-1 water tank and the formula tank.
2. Follow instructions three-6 on folio thirteen nether "Cleaning with attachments".
3. Set up tool on stain and press the trigger to spray solution onto the area to be cleaned.
4. Slowly motion the tool back and forth over the soiled surface, keeping the tool in contact with the carpet.
5. Release trigger and motion tool slowly over the soiled surface area to suction upwardly water and dirt.
6. Continue to clean the area, working in small sections, until no more than dirt can be removed.
7. Remove tool from hose when finished. Clean under warm water before storing.

Stain removal
Do Non Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of fourth dimension may cause it to set and become permanent.

1. Blot up liquids with an absorptive cloth or paper towels. White materials are recommended considering certain dyes may bleed and make the stain worse.
2. Gently scrape up any semi-solids with a spoon or spatula. Do non utilise a knife or other utensil with sharp edges because it could damage the rug or upholstery.
3. If the surface area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum.
4. Be sure to test any spot removal formulas in an camouflaged area start. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different solution or phone call a professional.
5. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, proceed cleaning in soiled area.
6. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled expanse. Do not overwet. Wait 3-5 minutes. Gently work the solution past blotting surface area with a clean, damp, colour safe cloth.
7. Clean using either the FLOOR CLEANING, or TOOLS setting on the ReadyTools punch.

Difficult flooring cleaning (Select models only)
Your PROheat 2X model may have come up with a hard flooring attachment and 2X Hard Floor Solutions Formula. If non, these products are bachelor for purchase by contacting the BISSELL Consumer Services department past telephone or at the website. The difficult flooring tool provides constructive cleaning for linoleum, vinyl, and tile floors. Caution: Practise non use on unsealed hardwood floors.

1. Vacuum or sweep thoroughly to pick upwards any loose debris and pet pilus.
2. Move any piece of furniture, if needed.
3. Fill the formula tank to "WATE R" line with h2o. Fill to "FORMULA" line with BISSELL 2X Hard Floor Solutions.
4. Fill up the 2-in-one water tank with hot tap water and fix aside.
5. Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place.
6. Ready ReadyTools punch to the "FLOOR CLEANING" setting.
7. Set the Custom Make clean dial to NO RMAL clean.
8. Plug into an outlet and plow the power switch and heater ON ( I ).
9. Slowly move the motorcar forrad and back over hard floor surface one time while depressing trigger.
   Caution: Practise not overwet.
10. Echo the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dingy water.
11. Allow acceptable time for floors to dry.
12. Remove hard floor tool, rinse and dry out before storing.
13. Rinse out the formula tank.

Alert:
To reduce the risk of burn and electrical shock- when cleaning a hard flooring, the BISSELL bare flooring tool kit 203-5642 must exist used and it must only be used with BISSELL Hard Flooring Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance.

Alert:
To reduce the gamble of fire, electric shock or injury unplug from outlet before servicing.

Auto storage
Once your cleaning is complete, make sure the two-in-one water tank is emptied, rinsed out, and stale before the next use. The formula tank tin can remain filled and ready to get. Note: Shop cleaner in a protected, dry surface area. Since this production uses h2o, it must non be stored where there is a danger of freezing. Freezing volition damage internal components and void the warranty.

Machine care
For best results, a few simple steps tin clinch your auto is well maintained afterwards your cleaning is consummate.

1. Flush your motorcar of whatsoever remaining residual solution.
   A. Fill the ii-in-1 clean water tank with clean hot tap water.
   B. Plug your machine into a proper outlet and set the Custom Clean punch to the rinse setting. Turn the ability on by pressing the power button.
   C. Recline the handle and press the spray trigger for 15 seconds while making forwards and astern passes on carpet. Release the trigger to suction. Repeat for another xv seconds. Proceed without pressing the trigger until there is no more water being suctioned.
2. Turn power and heater switches OFF (O). Unplug the auto and wrap the power cord. Empty the ii-in-one h2o tank.
3. Rinse out ii-in-1 water tank, with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it.
4. The elevation half of the tank can be rinsed clean through the nozzle expanse. Also, pop out the red filter underneath the top half of the tank and rinse out. Replace before putting the pinnacle and bottom halves of the tank together.
5. Before you place the cleaned two-in-ane water tank back onto the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. This tin be rinsed out at the faucet. Then supercede back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the lesser sides of the auto. Secure into identify with the spiral.

Tip:
Permit all parts dry completely before storing

half dozen. The inside of the finish caps by the brush rolls tin can be wiped out with a make clean newspaper towel, or, if a more than thorough cleaning is desired, the finish caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning.

7. Any loose hair or droppings tin can be pulled from the castor rolls and thrown away. For the well-nigh thorough clean earlier storage, follow directions on pages 18 & 19 for removal and replacement of the castor rolls and belts.

8. To make clean attachments that may have been used, remove from hose and rinse under clean, running water. Dry and replace attachment in the tool caddy. Clean the hose by suctioning make clean water from the tap. Earlier replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to folio fourteen.

nine. After carpet is dry out, vacuum again to remove hair and fuzz.

WARNING:
To reduce the gamble of fire, electric stupor, or injury,turn power OFF and disconnect plug from electric outlet earlier performing maintenance or troubleshooting.

Small belt removal and replacement

Occasional replacement of one or both belts may go necessary. If that is needed, please follow the instructions below.

1. Turn off the machine, and unplug it from the outlet.
2. Remove both the two-in-1 water tank and the formula tank. Set aside.
3. Unscrew the front end nozzle and remove it. Set bated.
4. Turn the machine on its side.
   IMPORTANT: cord side down.
5. Remove the clear terminate cap past unscrewing the 2 black screws. Take care not to drop the screws into the unit.
6. Remove one argent spiral.
7. Remove pivot arm past gently lifting upwards.
8. Remove small-scale brush belt.
9. Replace modest brush belt, and reverse steps above.

Brush removal and large belt replacement

Brushes can be removed for cleaning or replacement equally needed.

1. Follow small-scale belt removal Instructions on page xviii.
2. Remove brush rolls past pulling them off of the metal rods. Be conscientious not to lose the small washer at each end of the brush rolls.
3. Place cleaned or new castor rolls dorsum onto the rods. Make sure one washer is on each finish of the rollers prior to sliding onto the rod. Be sure to allow the rod slide through the bushing to insure proper fit.
4. Re-adhere the long belt on the bottom to the cogs of the minor roller brushes.
5. Place small belt over dorsum roller and metallic cog.
6. Place pivot arm in place and screw in identify using the silver spiral.
7. Re-attach clear end cap by tightening with the (2) black screws.
8. Return front nozzle to front of unit, past latching from underneath and so securing with a screw.
   I f yous have any questions or are having problem installing or replacing your belt(southward) or brushes, delight telephone call BISSELL Consumer Services or visit
   www.bissel.ca for instructional video.

Troubleshooting

Born heater set up lite does not illuminate

Possible causes

1. The heater switch is not turned ON ( I )
2. The power switch is not turned ON ( I )

Remedies

1. Plow the heater switch ON ( I )
2. Both switches must be ON ( I ) to actuate the heater ready light

Reduce Spray or No Spray Possible causes

1. Water tank may be empty
2. Formula tank may be empty
3. Tank may not be seated completely
4. Pump may accept lost prime.

DirtLifter® PowerBrush does not turn Possible causes

1. The belt is off or broken
2. The unit of measurement is in the upright position
3. Circuit billow on motorcar may have tripped

Cleaner not picking up solution Possible causes

1. ReadyTools dial may exist at wrong setting
2. Tank may not be seated properly
3. Tank may not exist assembled properly
4. Solution or ii-in-one water tank is empty
5. 2-in-1 h2o tank has picked up maximum dirty water and red bladder door has closed.
6. Carmine float "door" in the tank may have closed as a result of bumping an object or moving machine back and forth besides quickly

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do non return this product to the store.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-263-2535.

BISSELL consumer services

For data about repairs or replacement parts, or questions almost your warranty, phone call:

BISSELL Consumer Services
1-800-265-2535
Monday – Friday 8 a.m. — x p.one thousand. ET
Sabbatum nine a.thou. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Yard Rapids MI 49501
ATTN: Consumer Services

Or visit the BISSELL website – www.bissell.ca
When contacting BISSELL, take model number of cleaner available.
Delight tape your Model Number: _______
Delight record your Buy Date: _______

Annotation: Please keep your original sales receipt. Information technology provides proof of purchase date in the effect of a warranty claim. Run into Warranty on page 24 for details.

Replacement parts – BISSELL PROheat 2X
Below please find a list of common replacement parts. While not all of these parts may have come with your specific auto, all are bachelor to y'all for purchase, if desired.

Particular Role No. Office Proper noun
1 203-7010 T ank Assembly (complete) (Black)
2 203-6660 T ank Lid (Black)
3 203-6618 T ank Bottom (Blackness)
4 203-6675 C ap and Insert for Water Tank
five 203-6676 F ormula Tank (includes Cap & Insert for Formula Tank)
6 203-6677 C ap and Insert for Formula Tank
7 203-7649 F ront Nozzle (includes gasket)
8 203-6679 A utoload Gasket (fits both H2o and Formula Tank)
nine 203-6845 F loat Door
10 203-6680 T ank Filter (Lint Screen)
eleven 203-6682 C ord Wrap (Bluish Illusion)
12 203-6685 C lear End Cap due west/Border Brushes (2 pack, includes screws)
13 203-6686 B blitz Whorl – six row (includes 1 brush, axle, 2 swivel artillery)
14 203-6688 Southward mall Brush Belt (not-string side)
15 203-6804 L arge Brush Belt (cord side)
16 203-6689 Hose Secure Latch
17 203-6690 Hose Rack Assembly (Top/Bottom Hose Rack, Screws)

*Non all parts are included with every model.

Accessories – BISSELL PROheat 2X
Item Part No. Part Name
1 203-6651 iii" Tough Stain Tool
2 203-6652 Powered TurboBrush™ Hand Tool
three 203-6653 4" Upholstery Tool
4 203-6654 6" Stair Tool
v 203-6655 S praying Crack Tool
half-dozen 203-5642 B are Flooring Tool with trial size bottle of Hard Flooring Solutions formula
seven 203-7412 D eep Attain Pet Tool
eight 62E5 2X Fiber Cleansing Formula with Scotchgard™ Protection.
9 99K5 2X Pet Stain and Odor Formula with Scotchgard™ Protection.
x 89Q5 2X Allergen Cleansing Formula.
11 78H6 2X Professional Deep Cleaning Formula with Scotchgard™ Protection.
12 56L9 2X Hard Floor Solutions Formula.
thirteen 400 T ough Stain PreCleaner.
*Not all parts are included with every model.

Warranty – BISSELL PROheat 2X
If you lot need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-post, telephone, or regular postal service as described beneath.

Limited One Year Warranty
Subject to the *EXCE PTIONS AND EXCLUSIONS identified below, BISSELL C anada Corporation volition repair or replace (with new or remanufactured components or products), at BISSELL 'south option, free of charge from the engagement of purchase past the original purchaser, for one yr any defective or malfunctioning office.
See data below on "If your BISSELL product should crave service".
This warranty applies to production used for personal, and not commercial or rental service. This warranty does non utilise to routine maintenance components such as belts or brushes. Damage or malfunction acquired by negligence, corruption, neglect, unauthorized repair, or any other use not in accord with the User'southward Guide is non covered.

If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area or visit our website – www.bissell.ca

NOTE: Please go on your original sales receipt. It provides proof of date of purchase
in the upshot of a warranty claim. If you need information well-nigh repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Services.

Website: www.bissell.ca
E-postal service: [email protected]
Or Call: BISSELL Consumer Services i-800-263-2535
Mon – Friday 8 a.m. – 10 p.m. ET Saturday 9 a.thou. – viii p.m. ET
Or write: BISSELL Homecare, Inc.
PO Box 3606 G Rapids MI 49501
ATTN : Consumer Services

BISSELL CANADA CORPORATION IS Non LIABLE FOR INCIDENTAL OR CONSEQUENTIAL Amercement OF Whatever NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL'S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE Production.

Questions nearly your Manual? Post in the comments!

Source: https://manuals.plus/bissell/bissell-proheat-2x-user-manual

Share this post